Lithofin Care-KIT PE (for polished natural stone tops)

MN Power-CleanMN Polish CreamMN Easy-CleanMN Power-CleanA special product from the LITHOFIN-Range for marble, natural and concrete stone (MN). Lithofin MN Power-Clean is free of solvents, low in odour and economical in use. It is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance.Properties This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc. Technical Data: Density: approx. 1.0 g/cm³ Appearance: liquid, colourless, clear Odour: pleasant pH-Value: approx. 10 Flash Point: n.a. Solubility in Water: completeField of Use For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble. Suitable for indoor and outdoor use.Directions for Use Apply and evenly distribute Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously. Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use. Coverage: as supplied: approx. 5 to 10m² depending on dirt diluted: up to 30m² Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF. For cement residues and rust discolorations on granite, gneiss and similar acid resistant stones, use Lithofin MN Builders’ Clean.Storage Keep closed, cool and dry. Not above 25°C. Shelf life of up to three years.Environmental Protection Surfactants are biologically degradable in accordance with EU-regulations. Free of phosphates. Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.Safety Contents: 5-15% non-ionic surfactant; solubilizer; auxiliary agents; scent geraniol. Labelling according to EG-Guideline 199/45/EG: Xi, irritant. Risk and Safety Phrases: irritating to eyes. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show container or label. Advice: As with all cleaners avoid prolonged contact with skin or wear rubber gloves, if you have sensitive skin. First Aid Procedures: in case of inhalation take in fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. Do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment. Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure adequate ventilation. Product does not burn, fire-extinguishing activities according to surrounding. Additional Information is listed on the Material Safety Data Sheet. ADR2003: not a dangerous good.Packaging 500ml bottle with child-proof cap (10 per box) 1 litre bottle with child-proof cap (12 per box) 5 litre canister (4 per box)Please Note: statements concerning environmental and safety issues refer to the product as delivered (concentrated). This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Always test the product in an inconspicuous area. (AUS/NZ6.11gps/1.10)MN Polish CreamA special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Polish Cream is based on natural waxes, special additives and maintenance components.Properties Lithofin MN Polish Cream is a care product which penetrates into the surface of the stone and enhances the colour structure. With regular use, the surface can be polished to a high gloss. Surfaces become less sensitive to staining, scratches and similar blemishes. Used regularly, Lithofin MN Polish Cream is the optimal care treatment for marble, granite and other natural stones. Technical Data: Density: approx. 0.95 g/cm³ pH-Value: approx. 10 Flash Point: >23°C Appearance: paste, whitish Odour: unspecific Solubility in Water: not solubleField of Use For freshening up the polish and for protecting polished natural stone surfaces, especially marble. For touching up dull areas on marble. Lithofin MN Polish Cream is highly suitable for polishing small areas such as window sills, vanity tops, kitchen work tops and similar indoor surfaces. Please Note: on large surfaces use Lithofin MN Polish (liquid wax).Directions for Use Evenly apply Lithofin MN Polish Cream in circular motions using a cloth. Work in small controlled sections. After max. two minutes polish the surface with a soft cloth. Please Note: if the product is left on the surface for too long, it becomes difficult to polish. In this case, reapply Lithofin MN Polish Cream and polish immediately. Coverage: approx. 10 to 20m² per 500ml.Storage Keep closed and cool. Not above 25°C, keep tin firmly closed. Shelf life of up to two years.Further Maintenance For regular maintenance use Lithofin MN Easy-Care.Environmental Protection Contains solvents, free of chlorinated hydrocarbons. Surfactants are biodegradable according to EURegulations.Disposal: 500ml containers are made of environmentally friendly tin plate, 125ml containers are made of environmentally friendly polyropylene (PP). Clean containers can be recycled through collection system.Safety No health concerns once dried according to studies of FMPA (Forschungs- und Materialprüfungsanstalt Baden-Württemberg). Label according to EU-Directive 1999/45/EG: none Risk and Safety Phrases: harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Vapours may cause drowsiness and dizziness. Keep out of the reach of children. Do not breathe vapour. Avoid contact with skin. If swallowed, seek medical advice immediately and show this container or label. First Aid Procedures: remove contaminated soaked clothing immediately. No special measure necessary. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment. Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). In case of fire formation of dangerous gases possible. Product does not burn, fire-extinguishing activities according to surrounding. Additional Information is listed on the Material Safety Data Sheet. ADR2003: not a dangerous good.Packaging 125ml tin (20 per box) 500ml tin (10 per box)This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Always test the product in an inconspicuous area. (AUS/NZ7.11gps/4.11)MN Easy-CleanA special product from the LITHOFIN-Range for marble, natural and artificial stone (MN). This mildly alkaline, ready-to-use cleaning product is based on high-quality natural soaps, cleaning and care additives.Properties Highly active components dissolve dirt, oil and grease and allow for easy and streak-free cleaning. Special additives ensure that the protective effect of impregnators is not diminished with regular use. The surface will therefore remain protected for a long time. Lithofin MN Easy-Clean leaves a pleasant odour. Please Note: Lithofin MN Easy-Clean maintains and supports the protective effect of Lithofin MN Stain-Stop. Technical Data: Density: ca. 1.0 g/cm³ pH-Value: ca. 8 Appearance: liquid, colourless, clear Odour: fresh Solubility in water: good, completeField of Use For regular, every-day cleaning of all small natural stone and quartz surfaces such as kitchen work tops, table tops and in sanitary areas. Specially formulated for use on marble and limestone. Also suitable for ceramics, glass and plastic surfaces.Directions for Use Spray Lithofin MN Easy-Clean on the entire surface. Allow the product to work briefly, then wipe the surface with a cloth. Surface may have to be buffed with a dry cloth. Please Note: do not spray on hot surfaces. Coverage: up to 20m² per bottle.For more stubborn dirt we recommend Lithofin MN Power-Clean.Storage Cool and closed. Not above 25°C; can be stored for up to 3 years.Recommendation Natural stone floors should be cleaned regularly with Lithofin MN Easy-Care.Environmental Protection Surfactants are biologically degradable according to WRMG. Does not contain phosphates. Bottle is made from environmentally friendly polyethylane and can be recycled. Empty containers which are clean or have dried out may be recycled through collection systems. Please see label for details.Safety No health concerns according to LGA Nuremberg. Suitable for surfaces on which food is handled. Does not contain poisonous or dangerous substances. As with all cleaners, avoid prolonged contact with sensitive skin or wear rubber gloves. Keep out of reach of children. Contents: < 5% anionic surfactants, auxiliary agents. Label according to EU-Directive 1999/45/EG: none. Risk and Safety Phrases: none. First Aid Procedures: In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomitting. If swallowed by mistake drink plenty of water and seek medical treatment. Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Product does not burn, fire-extinguishing activities according to surrounding. ADR2003/GGVSE: not a dangerous good.Packaging 500ml-bottle with Sprayer (10 per box) 1 litre refill-bottle (10 per box)This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Always test the product in an inconspicuous area. (AUS/NZ7.11gps/12.10)