Description Nu-Clear Pro 4 x 20 Litres. Nu-Clear Pro is our label-compliant oxidiser, a professional-use-only blend of Sodium Hypochlorite, wetting agents, surfactants, and scent masks. The active ingredient is Sodium Hypochlorite at a strength of 10%. Nu-Clear Pro has been formulated to clean, sanitise, and disinfect most external hard surfaces. This product should not be used as a biocide, and we always recommend cleaning the surface prior to use. Application: Always test on an inconspicuous area prior to use. Clean the surface first with a pressure washer, or for severe build-up, treat the surface first with PureSeal BacClear Pro. Dilute Nu-Clear Pro to a ratio of 1 part product to 5 parts clean water. Apply the diluted product to the surface with a suitable sprayer or brush and leave it to dwell for 30 minutes without allowing the product to dry out; this is extremely important. Once you have allowed a sufficient dwell time, agitate if required, then rinse thoroughly. You may need to go stronger if required; moreover, this product can be used neat to spot-clean stubborn areas. Top Tips: Always pre-wet any surrounding plants, grass or delicate surfaces that may come into contact with the product. We recommend doing this before and after using Nu-Clear Pro. Avoid allowing Nu-Clear Pro to come in to contact with Lead. If this happens, reverse the damage by using OxyAcid Pro. Coverage: Up to 6m² per litre PPE Required: Chemical resistant gloves Eye protection Respirator with ABEK P3 filters Overalls with head and neck protection
