* Concrete Floor Finishes Combo for polished, designer or coloured concrete 10m2

The Concrete Floor Finishes Combo will help you clean, provide stain protection, and then add a finish (either satin effect or gloss / shiny effect) to your concrete. The Concrete Floor Finishes combo is designed for use on designer concrete, coloured concrete, or polished concrete. It will treat approximately 10 square metres of concrete.The Concrete Floor Finishes Combo includes:⇒1 litre of FilaPS87 degreasing stain-removing detergent – perfect for cleaning concrete⇒1 litre of FilaFob penetrating sealer for stain protection – concrete sealerAnd your choice of EITHER⇒1 litre of FilaSatin satin-look self-polishing wax (for a satin finish)OR⇒1 litre of FilaClassic shiny / gloss finish liquid wax (for a glossier, shinier finish)Normal retail price between $213-219, save over 15% by buying the combo for just $181!View product sheets for each product here: FilaPS87, FilaFob, FilaSatin, FilaClassicHOW TO CLEAN AND ADD FINISH TO DESIGNER, POLISHED OR COLOURED CONCRETE USING THE CONCRETE FLOOR FINISHES COMBOCleaning Concrete:Dilute FilaPS87 with water at a ratio of 1:5 and apply to the surface.Leave to act for a few minutes then agitate with a single-disc professional cleaner, ascrubbing brush or a stiff broom. Vacuum, mop or wipe up dirt and then rinse with plenty of water.Concrete Sealer for stain protection and to hold the Concrete Finishes:FilaFob does not require dilution: Ready to use.Apply FilaFob with a large brush. The following day, apply one or two coats of the most suitable protective product (FilaSatin for a satin finish or FilaClassic for a shinier finish)Concrete Floor Finishes – satin effect finish (FilaSatin)Dilution: use undiluted.Apply an even coat of the product to a dry and clean floor using a cloth or othersuitable method. After one hour, apply a second coat at right-angles to the first.The floor can be walked on after 2-3 hours. Can be buffed with a woollen cloth to increase the level of gloss if desired.From time to time, wash’n’wax the floor using a cupful of product in a bucket of water.Concrete Floor Finishes – gloss / shiny finish (FilaClassic)Dilution: use undiluted.Apply an even coat of the product to a dry and clean floor using a cloth or othersuitable method. After one hour, apply a second coat at right-angles to the first.The floor can be walked on after 2-3 hours. Can be buffed with a woollen cloth to increase the level of gloss if desired.From time to time, wash’n’wax the floor using a cupful of product in a bucket of water.How to Clean Concrete once it’s sealed:Use a diluted solution of FilaCleaner – dilute 1:200 for ordinary concrete cleaning or 1:30 for a deeper clean.* Do not use FilaPS87 to clean the surface once the concrete sealer has been applied, as it will remove the sealer. *For spot stain removal, use Fila NoSpot for oily, greasy stains or FilaSR95 for organic (food-based) stains.These products are available to purchase at a discounted price in the Tile Cleaning and Stain Removal Combo.